Automatic fire box molding equipment AT

Automatic Fire Box Forming EquipmentAT

Model: AT65-240;

Place of Origin: Weifang, Shandong;

Manufacturer: Weifang Oteng Cold Bend Machinery Co., Ltd.;

Operator requirements: 1 person can be;

Production speed: according to the size of the box, the speed is different, the overall speed is much higher than the transmission Fire box box processing;

roll material: Gr15/Cr12, etc.;

Molding pass: 15-16 passes;

Power Requirements: AC380V  50Hz;

Rolling Thickness: 0.6mm-1.5mm (Interval);

Air Source Requirements: 0.6MPa;

Automatic fire box cold bending forming production equipment parameters:

Process:<>

Feeding (Strip) - Leveling Feeding - Storage Pit - Servo Feeding, Hydraulic Punching - Storage Pit - Cold Bending Forming - Hole Locating, Hydraulic Automatic Bending Cut - Unloading

Institutional equipment:

Unwinder leveling feeder servo feeder, hydraulic punching machine cold forming mainframe (adjustable Body size specifications) 2 automatic bending machine and cutting machine control box

Specific description:

1. Single-head cantilever box uncoiler:

(1), maximum load: ≤4T;

(2), unwinding inner diameter range: Φ450～Φ500 mm;

(3), maximum unwinding outer diameter: ≤Φ1300 mm;

 2,5 4-roller leveling feeder:

(1)  Leveling form: 3, 2 sets of power rollers in the top 2;

(2) Drive power: 3Kw;

 3, servo feed punching:

(1)2 2 sets of 2 roller servo feeding mechanism;

(2) Servo motor power: 2.3KW;

 (5)Electronic control system 1 Set;

4, cold bend forming machine:

(1), 15 or 16 main rolls,  1 set of guiding device (the main structure is fixed on one side The other side of the overall movement adjustment, when replacing the thickness of the box, you only need to manually rotate the handwheel to the appropriate position according to the size scale);

(2), the maximum material width: 300 mm; /p>

(3), rolling thickness: 0.8-1.5mm (interval);

(4), spindle diameter ф55mm;

(5), drive motor power: 5.5KW;

  (6), cold bending forming machine composition: This machine is the main working part of the whole unit. After continuous strip rolling deformation, the strip becomes a profile that meets the requirements of the drawings. The machine consists of: fuselage, wall panel assembly, guiding device, straightening device and transmission system.

5, Electronic control system:

The system consists of 5.5KW inverter, PLC control box, Color touch screen, console and other components. The system is used to complete the electrical control of the whole unit, and the control cabinet is equipped with a fault protection device. If any control switch of the whole unit fails, the whole unit will automatically stop the action.