< p="">

The car panel equipment is mainly used to produce the car panel. As a line machine, it has long service life, simple operation, full function and semi-automatic strength. However, everyone needs to pay attention to the equipment. Some things, the following small series to give you a brief explanation:

The use of car compartment board equipment looks very simple, but still have to master it, there are many details to pay attention to:

< p=""> 1, the environment of the equipment, the environment of the equipment is very important, especially suitable places, because this production equipment is relatively large, the equipment must be on the basis of the level of cement, together with screws, the equipment should be satisfied Wide, moderate temperature and humidity.

2. When the equipment is in strict condition, the equipment should be strictly applied. After the equipment is finished, the shafts should be coated with lubricating oil, and then the test runs. After the equipment is in normal operation, the equipment can be produced. It is necessary to produce equipment for the manufacturer. Generally, the manufacturer will provide free equipment debugging services.

3, equipment maintenance, car compartment board equipment after the operation and maintenance, to maintain maintenance records, many production companies do not pay attention to equipment maintenance, this is not correct, in the standard During production, the equipment's application records, repair records, and equipment maintenance records are all clearly defined and included in the review. As an integral part of the standardized production, equipment maintenance is mainly to repair the equipment punctuality, and there are problems. Handle it in time, not wait until the problem arises.

4, equipment maintenance, equipment maintenance is generally divided into minor repairs, medium repairs and overhauls, minor repairs are generally three months of overhaul, medium repairs are repaired once every six months, overhaul is suspended once a year, these It is necessary to make a record. The usual maintenance is to insist that the surface of the equipment is clean and regular, whether the screws are loose, whether the lubricating oil is satisfied, etc., should be checked every day.

In addition, the operation of the car panel equipment should pay attention to the standard operation. Although the operation of the equipment is simple, it must be carried out in strict accordance with the correct operation method, and cannot be operated at will, and requires special personnel to operate. After all, it is an automation device, and the requirements to master the automation operation specification can reduce the occurrence of problems.

 

p>