Cold-formed design is in the process of use, first need to be installed, then in the cold bend What do we need to pay attention to when installing the molding equipment? Let's take a look at it with Xiaobian:
(1) First of all, for the convenience of maintenance, please be more than 50CM from the wall;
(2) Then fine adjustment: the machine stand must be horizontal Correction to maintain precision;
(3) Secondly, the following items must be important for the installation foundation: A strength must be able to be random weight B base must be level;
(4) cold The installation of the bending forming equipment needs to refer to the instruction manual;
(5) Then have a place with good power supply;
During the use of the cold forming equipment, it needs to be continuously Maintenance, in order to ensure the normal operation and service life of the machine, today Xiaobian will give you a brief introduction to the maintenance of the fuel tank part of the cold-bending forming equipment:
1. Check the oil level of the fuel tank every week, such as After the hydraulic system is repaired, it should also be checked. The oil level should be filled with hydraulic oil below the oil window;
2. The system oil temperature should be between 35 °C and 60 °C, and should not exceed 70 °C. High will cause deterioration of oil quality and accessories;
3. New machine should be replaced after 2000 hours of work In the future, after every 4000 to 6000 hours of work, oil should be changed. Each time you change oil, you should clean the fuel tank;
Xiaobian will introduce you here first, and there will be more exciting information for you later. Present!
Related Industry Knowledge
- What are the characteristics of fire box molding equipment?
- The benefits of using a door frame forming machine
- What are the benefits of using car panel equipment?
- Turning of steel machinery for cold-bending forming equipment and its twisted solution
- The role of cold-formed steel machinery in the processing of food trough equipment
- How to control the quality of photovoltaic scaffolding equipment
- Technical attention to the ground matrix of solar photovoltaic stenting equipment
- Laying hen culture trough equipment
- What are the correct operating procedures for cold forming equipment?